 Bill Mecke, P.E. KWS President Visit Website |
Bill Mecke, P.E. is President of KWS, one of the largest screw conveyor manufacturers in North America. He has over 20 years of industry experience working directly with customers to solve their material handling needs. Mecke earned his Bachelor of Science degree in Mechanical Engineering from Texas A&M University. He is also a registered Professional Engineer in the State of Texas. Founded in 1972, KWS Manufacturing Company, Ltd. is the leader in the design and manufacture of conveying equipment for the bulk material handling industry. KWS provides the highest quality equipment and service, marketed globally to many diverse industries and to a large customer base, including; power transmission distributors, engineering firms, system suppliers, original equipment manufacturers (OEMs), and end users. KWS corporate office and manufacturing facilities are located in Burleson, Texas. For more information, please call KWS at 800-543-6558 or visit www.kwsmfg.com.
|
Mechanical Conveying Q&A
-
I am consulting for a plant that produces about 150 tns of meat and bone meal daily. We would like to load rail cars on the plant site but the storage silos are about 1500 ft from the rail load out area. The conveyor would have to go vertical about 50 ft then across the roof to the rail load out area about 1500 ft. We would need three conveyors to route around obstacles on the roof. It needs to be dust and weather proof. The material weighs about 45 lbs/cu ft. Do you have any suggestions?Answered February 10th, 2012 by Expert:Since the rail cars are located 1,500 ft from the storage silos, belt conveyors are your best option for conveying the meat and bone meal. I recommend a bucket elevator to transfer the product vertically 50 ft. The belt conveyors and the bucket elevator would be completely enclosed and weather proof. The system capacity of 150 tons per day could easily be handled with this system even if it was only operated 12 hours a day. A screw conveyor could be used in the rail car loading area because of the ability to easily load multiple points on the rail cars. Belt conveyors, a bucket elevator, and a screw conveyor are a very economical solution to the conveying application. Typical materials of construction are carbon steel and utilize CEMA standard components.